GSA Auctions Miscellaneous Update

.

04/15/2026 06:42 PM EDT

CURRENT BID: $10.0 STATE: MO NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 16:42:00 CST

Overview

This lot contains (5) fans. The fans are classified in used condition. The fans were previously used on a production room floor.

Condition & Markings

  • Usable/good condition.
  • The fans show signs of previous use from production room floor operation.

(2064FU60793915)

]]>

04/15/2026 06:32 PM EDT

CURRENT BID: 100.0 STATE: HI NO. OF BIDDERS: 1 CLOSE TIME: Wed, 22 Apr 2026 16:32:00 CST

Overview

Carryall 6 golf cart. The vehicle is classified in salvage condition. The original date in service was May 20, 2008. The overall condition of the asset is unknown at the time of posting.

Specifications

  • Make: Club Car
  • Model: Carryall 6

Condition & Markings

  • This lot is in salvage condition. Parts are missing, and repairs are required.
  • The golf cart displays tag number 2FRPD.
  • The overall condition assessment was not available at the time of listing.
  • SF 97 title would be issued upon request.
  • Note: Salvage title would be issued, “Not to be titled for highway use.”

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted. (ICN: Z51800-6042-MA05)

]]>

04/15/2026 06:22 PM EDT

CURRENT BID: $100.0 STATE: HI NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 16:22:00 CST

Overview

Mule utility cart. The vehicle is classified in salvage condition. The cart was originally placed in service on November 28, 2008.

Condition & Markings

  • This lot is in salvage condition. Parts are missing, and repairs are required.
  • The cart displays tag number 2F6TC.
  • SF 97 will be issued upon request.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted. (ICN: Z51800-6042-MA03)

]]>

04/15/2026 05:36 PM EDT

CURRENT BID: 100.0 STATE: WI NO. OF BIDDERS: 1 CLOSE TIME: Wed, 22 Apr 2026 15:36:00 CST

Overview

(20) Trijicon RMR Sight LED 3.25 MOA Red Dot Type 2. The item is classified in usable condition. Each sight includes a hard case. Quantities are approximate and models may vary.

Specifications

  • Make: Trijicon
  • Model: RMR Sight LED Type 2
  • MOA: 3.25

Key Features

  • LED red dot sight system.
  • Each sight includes a hard case.

Condition & Markings

  • This lot is in used condition. Parts may be missing, and repairs may be required.
  • Working condition is not guaranteed.
  • Models may vary within the lot.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
  • Items can be picked up, or shipping can be arranged at the bidder’s cost.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.

]]>

04/15/2026 05:11 PM EDT

CURRENT BID: $25.0 STATE: PA NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 15:11:00 CST

Overview

This lot contains (2) Advanced Life Support Manikins. The manikins are classified in repairable condition. These are life-size training manikins that were brought into the facility in 2012 and 2015, and have reached their life expectancy and were replaced with new units.

Key Features

  • Life-size training manikins designed for advanced life support training..
  • One manikin functions as a sim man trainer.
  • Includes whatever apparatus is currently connected to the manikins.

Condition & Markings

  • This lot is in repairable condition. Parts may be missing, and repairs may be required.
  • The manikins have reached their operational life expectancy at the facility.
  • Sold as manikins only with attached apparatus.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.

]]>

04/15/2026 05:07 PM EDT

CURRENT BID: $100.0 STATE: WA NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 15:07:00 CST

Overview

Yale forklift & Depth Charger. The forklift is classified in repairable condition. The unit displays the standard yellow finish typical of industrial forklifts and shows signs of wear consistent with operational use.

Exide Depth Charger, an industrial forklift battery charger housed in a heavy-duty blue steel casing. The unit features a control panel with multiple charging mode options — including Equalize, Refresh, and Stop-Test functions — along with LED indicator lights and a digital display. It is equipped with thick industrial cables and a multi-pin connector plug, designed for charging large lead-acid batteries used in electric forklifts and other industrial equipment.

Key Features

  • Industrial forklift designed for material handling operations.
  • Yellow finish standard for warehouse and job site visibility.

Condition & Markings

  • This lot is in repairable condition. Parts may be missing, and repairs may be required.
  • The forklift shows operational wear and may require maintenance or repairs to restore functionality.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted. (ICN: 470E72-6061 #0002 & #0003)

]]>

04/15/2026 05:06 PM EDT

CURRENT BID: $25.0 STATE: IL NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 15:06:00 CST

Overview

(1) Tamper pist-hammer type model BS50-2i. The equipment is classified in repairable condition. The equipment displays typical wear consistent with construction equipment use.

Specifications

  • Model: BS50-2i

Condition & Markings

  • This lot is in repairable condition. Parts may be missing, and repairs may be required.
  • The equipment displays typical wear consistent with construction equipment use.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
  • Customer is responsible for all shipping and moving charges, all loading of equipment, and must pick up and remove all item(s) from the facility independently.
  • Item(s) are to be loaded to the tailgate.
  • Vehicle must be able to accommodate standard loading dock only.
  • Item(s) must be picked up within 10 days of winning bid.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.

]]>

04/15/2026 04:56 PM EDT

CURRENT BID: $25.0 STATE: IL NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 14:56:00 CST

Overview

(1) tamper piston-hammer type, model BS50-2i. The equipment is classified in repairable condition. The equipment displays typical wear consistent with construction equipment use.

Specifications

  • Model: BS50-2i

Condition & Markings

  • This lot is in repairable condition. Parts may be missing, and repairs may be required.
  • Equipment displays typical wear consistent with construction equipment use.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
  • Customer is responsible for all shipping and moving charges, all loading of equipment, and must pick up and remove all item(s) from the facility independently.
  • Item(s) are to be loaded to the tailgate.
  • Vehicle must be able to accommodate standard loading dock only.
  • Item(s) must be picked up within 10 days of winning bid.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.

]]>

04/15/2026 04:46 PM EDT

CURRENT BID: $25.0 STATE: IL NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 14:46:00 CST

Overview

(1) Ingersoll Rand BS500 tamper pist-hammer type. The equipment is classified in repairable condition. The equipment displays typical wear consistent with construction equipment use.

Condition & Markings

  • This lot is in repairable condition. Parts may be missing, and repairs may be required.
  • Equipment displays typical wear consistent with construction equipment use.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
  • Customer is responsible for all shipping and moving charges, all loading of equipment, and must pick up and remove all item(s) from the facility independently.
  • Item(s) are to be loaded to the tailgate.
  • Vehicle must be able to accommodate standard loading dock only.
  • Item(s) must be picked up within 10 days of winning bid.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.

]]>

04/15/2026 04:35 PM EDT

CURRENT BID: $120.0 STATE: AZ NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 14:35:00 CST

1 LOT -(6 EA) LabRepCo 2-door Refrigerators, model LABN-52-HG-006. The refrigerators are classified in used condition. The units feature glass doors with wire shelving and appear to be laboratory-grade refrigeration equipment..

Key Features

  • Glass door design allows for easy viewing of contents without opening.
  • Wire shelving system provides adjustable storage configuration.
  • Digital temperature display panel located on the top section.
  • White exterior finish with stainless steel interior components.

Condition & Markings

  • This lot is in used condition. Parts may be missing, and repairs may be required.
  • Units display LabRepCo branding on the front panel.
  • Exterior shows normal signs of use with minor scuffing on surfaces.
  • Glass doors appear intact with functional door handles and hinges.
  • Interior shelving and components are present as visible in the image.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.
  • Sold as is. ICN 369405-6062-0001

]]>

04/15/2026 04:23 PM EDT

CURRENT BID: $25.0 STATE: IA NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 14:23:00 CST

This lot contains (1) refrigerator. (707441-6049-3806).

Condition & Markings

  • This lot is in used condition. Parts may be missing, and repairs may be required.
  • The refrigerator is located in a service building within a multi-level facility.
  • An inspection is recommended to assess the operational status and condition of the unit.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
  • The facility contains multiple levels, and an elevator is available for use.
  • The equipment is distributed across several buildings within the same general area, and the purchaser must plan accordingly when arranging for removal.
  • For inquiries or to schedule an inspection or pickup, contact Alex McGrew at AMcGrew@AmeriCorps.gov or 202-355-2214, or Armando Cruz at ACruz@AmeriCorps.gov or 202-770-6997.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.

]]>

04/15/2026 04:22 PM EDT

CURRENT BID: $20.0 STATE: ID NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 14:22:00 CST

Overview

This lot contains (3) pallets, with (2) pallets being banded and secured.. The lot includes miscellaneous tent components with unknown exact contents, as the lot was not opened for visual inspection. 

Key Features

  • Includes multiple olive drab colored fabric tent sections and components.
  • Contains bundled tent poles and structural support elements organized on pallets.
  • Features various tent hardware including stakes, straps, and fastening components.
  • Includes what appears to be tent flooring or ground cover materials.

Condition & Markings

  • This lot is in repairable condition. Parts may be missing, and repairs may be required.
  • The tent fabric components show signs of outdoor storage and weathering..
  • Some fabric sections display fading and discoloration consistent with extended exposure.
  • Yellow markings are visible on some tent components.
  • The tent poles appear to have surface oxidation and wear from use.
  • Components are stored in various canvas bags and containers showing wear and staining.
  • The exact inventory and completeness of tent components cannot be determined without full inspection.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.

]]>

04/15/2026 04:12 PM EDT

CURRENT BID: 224.0 STATE: ID NO. OF BIDDERS: 2 CLOSE TIME: Wed, 22 Apr 2026 14:12:00 CST

Overview

This lot contains (2) maintenance enclosure tents. The tents are classified in repairable condition. The tents are stored in gray fabric transport covers and secured on a wooden pallet with banding straps.

Key Features

  • Lightweight maintenance enclosure fabric transport covers designed for field operations.
  • Each tent includes end section assembly, intermediate section, and repair kit components as indicated on the transport covers.
  • Transport covers include built-in carrying handles and straps for portability.
  • Items are packaged on a 48″x96″ pallet for shipping and storage.

Condition & Markings

  • This lot is in repairable condition. Parts may be missing, and repairs may be required.
  • The condition of the tents is unknown as they were not set up or visually inspected.
  • It is unknown if the tents are complete.
  • Warning text on covers states “WEIGHT OF THE TRANSPORT COVER EXCEEDS THE RECOMMENDED LIFTING LIMITS FOR 6 PERSONS”.
  • One transport cover shows visible damage with a tear or hole in the fabric.
  • Items are banded to the pallet and the weight is unknown.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.

]]>

04/15/2026 04:02 PM EDT

CURRENT BID: $20.0 STATE: ID NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 14:02:00 CST

Overview

This lot contains (2) MGPTS medium tents. The tents are classified in repairable condition. The tents are stored on (2) 48″x96″ pallets and are loosely banded to the pallets. The condition of the tents is unknown as they were not set up or visually inspected.

Key Features

  • Tents include olive drab fabric components and associated hardware.
  • Metal tent frame components and stakes are visible among the tent materials.
  • Various straps and fastening components are present with the tent materials.

Condition & Markings

  • This lot is in repairable condition. Parts may be missing, and repairs may be required.
  • It is unknown if the tents are complete.
  • Some fabric components show discoloration and potential wear from storage conditions.
  • The tent materials are bundled and secured with straps on wooden pallets.
  • Weight of the items is unknown.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.

]]>

04/15/2026 04:00 PM EDT

CURRENT BID: $50.0 STATE: ID NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 14:00:00 CST

Overview

This lot contains a Mobile Pallet Truck Inc model FTAFC96 electric lift pallet jack. The unit is classified in repairable condition. The pallet jack powers on and appear to operate as intended, buyer is to verify. 

Specifications

  • Make: Mobile Pallet Truck Inc
  • Model: FTAFC96

Key Features

  • Manual walking operation with electric up/down fork control.
  • Adjustable width front wheel stabilizers for enhanced stability.
  • Adjustable width forks to accommodate various pallet sizes.
  • Integrated Century battery charger with automatic shut-off and engine start functionality.

Condition & Markings

  • This lot is in repairable condition. Parts may be missing, and repairs may be required.
  • The Group 27m 12v battery was removed after testing and is not included with the sale.
  • Unit displays “Mobile Lift” branding on the mast assembly.
  • Control panel includes up/down directional indicators.
  • Manufacturer nameplate visible indicating “Made in Canada”.
  • Shows signs of use with surface wear and minor scuffing on the red painted surfaces.
  • Weight specifications are not available.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.

]]>

04/15/2026 03:57 PM EDT

CURRENT BID: $10.0 STATE: ID NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 13:57:00 CST

Overview

This lot contains a Econoline dust collector. The unit is classified in repairable condition. The operating condition is unknown as the unit was unable to be tested. The dust collector has been stored outdoors under covered storage and shows signs of outdoor exposure including rust staining and weathering.

Specifications

  • Make: Econoline
  • Motor Make: Leeson
  • Motor Model: C4C34FC11B
  • Motor Power: 1/2 HP
  • Voltage: Single phase 115/208-230 volt

Key Features

  • Equipped with a cylindrical filter element housed within the main collection chamber.
  • Features a bottom discharge opening for dust collection.
  • Mounted on a metal stand frame for stability.
  • Compact vertical design suitable for workshop environments.

Condition & Markings

  • This lot is in repairable condition. Parts may be missing, and repairs may be required.
  • Operating condition is unknown as the unit was unable to be tested.
  • Shows rust staining and discoloration on exterior surfaces from outdoor storage.
  • Visible weathering and oxidation on metal components.
  • Filter element appears intact but condition cannot be verified without testing.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.

]]>

04/15/2026 03:01 PM EDT

CURRENT BID: $1000.0 STATE: AZ NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 13:01:00 CST

Ground Tamper. Purchased in 2010. The equipment is classified in repairable condition. The tamper appears to be a gas-powered compaction unit with a vibrating plate and handle assembly.

Key Features

  • Gas-powered engine with pull-start mechanism.
  • Vibrating compaction plate for soil and surface preparation.
  • Handle assembly with control mechanisms.
  • Compact design for maneuverability in confined spaces.

Condition & Markings

  • This lot is in repairable condition. Parts may be missing, and repairs may be required.
  • The unit shows signs of use with visible wear on the compaction plate.
  • Surface rust and weathering visible on metal components.
  • Engine condition and operational status cannot be determined from visual inspection.
  • Handle assembly appears intact but may require maintenance.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.
  • Sold as is. ICN 368174-6089-0018

]]>

04/15/2026 03:00 PM EDT

CURRENT BID: $20.0 STATE: ID NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 13:00:00 CST

Overview

This lot contains (1) collection of cardboard boxes in three different sizes. The lot includes 75 boxes measuring 32″x6″x6″, 95 boxes measuring 24″x24″x12″, and 82 boxes measuring 18″x16″x16″. The boxes are organized and stored on two pallets for convenient handling and transport.

Key Features

  • Three different box sizes to accommodate various storage and shipping needs.
  • Boxes are pre-organized and bundled on pallets for efficient handling.
  • Flat-packed configuration for space-efficient storage.

Condition & Markings

  • This lot is in new condition. Parts may be missing, and repairs may be required.
  • Some boxes show minor edge wear from handling and storage.
  • The boxes are secured with plastic wrap and banding straps on wooden pallets.

Inspection and Removal

  • Inspection and Removal: This facility is only open on Wednesdays for viewing and pick up. Hours are 10 am to 12PM. If you cannot meet this time frame, please call for assistance. Appointments are required.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
  • Due to the size or quantity of your lot, you may need to contact an outside shipping/packaging company to package and ship your items. Weights and dimensions will be provided if needed.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.

]]>

04/15/2026 02:59 PM EDT

CURRENT BID: $20.0 STATE: ID NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 12:59:00 CST

Overview

This lot contains a Western 8.5 foot snow blade. The item is in used condition and requires a mount to attach to a pickup truck.

Specifications

  • Make: Western
  • Model: 8.5 Pro Plus W/Quad
  • Length: 8.5 feet

Key Features

  • Features hydraulic lift system with chains for blade positioning.
  • Includes angling mechanism for directional snow movement.
  • Equipped with reinforced steel construction and mounting brackets.

Condition & Markings

  • This lot is in used condition. Parts may be missing, and repairs may be required.
  • The snow blade displays Western branding and model identification markings.
  • The blade shows normal wear consistent with previous use.
  • The mounting system requires a compatible pickup truck mount for installation.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.

]]>

04/15/2026 02:57 PM EDT

CURRENT BID: $5.0 STATE: ID NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 12:57:00 CST

For removal of this property, please contact Jessica Wirth at 2086668657 or jwirth@idl.idaho.gov

Overview

  • This lot contains a grey pickup truck canopy that has been stored outside for several years and shows signs of weathering and outdoor exposure. They agency does not know what vehicle this canopy fits. (AG0001928206)

Key Features

  • Features sliding side windows and a rear window.
  • Includes mounting hardware and clamps for truck bed installation.

Condition & Markings

  • This lot is in used condition. Parts may be missing, and repairs may be required.
  • The canopy shows significant weathering and discoloration from extended outdoor storage.
  • Visible dirt, grime, and algae buildup on exterior surfaces.
  • Windows are cloudy and dirty from prolonged exposure to elements.
  • The compatible vehicle size is unknown.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
  • For more information please contact Kane Steinbruecker 208-476-5612 KSTEINBRUECKER@CPTPA.IDAHO.GOV.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.

]]>

04/15/2026 02:32 PM EDT

CURRENT BID: 750.0 STATE: WA NO. OF BIDDERS: 2 CLOSE TIME: Wed, 22 Apr 2026 12:32:00 CST

Overview

This lot contains (15) 2017 EOTECH XPS2-300 holographic sights. The EOTECH XPS2 Holographic Weapon Sight is a lightweight, non-magnifying, optical sight designed for close to mid-range engagements. The items are classified in used condition.

Specifications

  • Make: EOTECH
  • Model: XPS2-300
  • Model Year: 2017

Condition & Markings

  • This lot is in used condition. Parts may be missing, and repairs may be required.
  • The sights show scratches and wear as visible in the provided images.
  • Some attachment hardware pieces are missing from various units.
  • Working condition is not guaranteed.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
  • Appointment must be made for pickup. Pick-up hours are Monday through Thursday 7AM-3PM, no holidays.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted. (ICN: 140519-6068-0004)

]]>

04/15/2026 02:22 PM EDT

CURRENT BID: 850.0 STATE: WA NO. OF BIDDERS: 2 CLOSE TIME: Wed, 22 Apr 2026 12:22:00 CST

Overview

This lot contains (15) 2017 EOTECH XPS2-300 holographic sights and (15) Unity Tactical Fast Riser mounts. The items are classified in used condition. The EOTECH XPS2 is a lightweight, non-magnifying, optical sight designed for close to mid-range engagements. The Unity Tactical FAST Riser is designed to bring red dot optics with built in lower 1/3 cowitness picatinny mounts in line with the heights of other Unity Tactical FAST products.

ASSETS: 1125494, 1125487, 1125488, 1125486, 1125484, 1125483, 1125482, 1125481, 1125493, 1214112, 1214114, 1126338, 1126340, 1126341, 1126344.

Specifications

  • EOTECH XPS2-300:
    • Make: EOTECH
    • Model: XPS2-300
    • Model Year: 2017
  • Unity Tactical Fast Riser:
    • Make: Unity Tactical
    • Model: Fast Riser

Key Features

  • The XPS2-300 is specifically designed for 300 Blackout ammunition.
  • The holographic sight provides non-magnified targeting capability.
  • The Unity Tactical risers feature picatinny mount compatibility.

Condition & Markings

  • This lot is in used condition. Parts may be missing, and repairs may be required.
  • Visible scratches and wear are present on the items as shown in the photographs.
  • Some attachment hardware pieces are missing.
  • Working condition is not guaranteed.
  • Items are sold as is.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
  • Appointments must be made for pickup. Pick-up hours are Monday through Thursday 7AM-3PM with no pickups on holidays.
  • Purchaser is responsible for loading, removal, and shipping.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted. (ICN: 140519-6068-0003)

]]>

04/15/2026 02:14 PM EDT

CURRENT BID: $25.0 STATE: MN NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 12:14:00 CST

Overview

ASHTECH PROMARK 220 RECEIVER-GPS model PM5 V2. The item is classified in unused condition still in the box.

Specifications

  • Make: ASHTECH
  • Model: PROMARK 220 RECEIVER-GPS PM5 V2

Condition & Markings

  • This lot is in unused condition. Parts may be missing, and repairs may be required.
  • The item is described as unused in the box, however exact condition is unknown.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
  • Pick up is by appointment only with hours of operation Monday through Friday 8:00 to 4:00, closed weekends and holidays.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.

]]>

04/15/2026 02:12 PM EDT

CURRENT BID: 850.0 STATE: WA NO. OF BIDDERS: 2 CLOSE TIME: Wed, 22 Apr 2026 12:12:00 CST

Overview

This lot contains (15) EOTECH XPS2-300 holographic sights from 2017 and (15) Unity Tactical Fast Riser mounts. The items are classified in used condition. The EOTECH XPS2 is a lightweight, non-magnifying, optical sight designed for close to mid-range engagements. The Unity Tactical FAST Riser brings red dot optics with built-in lower 1/3 cowitness picatinny mounts in line with other Unity Tactical FAST products.

ASSETS: 1126308, 1126305, 1126310, 1126312, 1126313, 1126314, 1126316, 1126317, 1126320, 1126322, 1126324, 1126325, 1126326, 1126328, 1126329.

Specifications

  • EOTECH XPS2-300:
    • Make: EOTECH
    • Model: XPS2-300
    • Model Year: 2017
  • Unity Tactical Fast Riser:
    • Make: Unity Tactical
    • Model: FAST Riser

Condition & Markings

  • This lot is in used condition. Parts may be missing, and repairs may be required.
  • Items show scratches and wear as visible in photographs.
  • Some attachment hardware pieces are missing.
  • Working condition is not guaranteed.
  • Items are sold as is.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
  • Appointment required for pickup.
  • Pick-up hours: Monday through Thursday 7AM-3PM, no holidays.
  • Purchaser responsible for loading, removal, and shipping.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted. (ICN: 140519-6068-0002)

]]>

04/15/2026 02:04 PM EDT

CURRENT BID: 25.0 STATE: OH NO. OF BIDDERS: 1 CLOSE TIME: Wed, 22 Apr 2026 12:04:00 CST

Overview

Wacker Nueson Hand Tamper Model BS60-4s. The unit is classified in used condition. The tamper is operational but experiences difficulty during startup.

Specifications

  • Make: Wacker Nueson
  • Model: BS60-4s
  • Serial Number: 20054767

Condition & Markings

  • This lot is in used condition. Parts may be missing, and repairs may be required.
  • The unit operates but is hard to start.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
  • Please call to schedule date and time for viewing or pick up. Contact Ronald Kupiec at 1-216-246-5037 or email Ronald.Kupiec@va.gov. POC Keyona Welch 1-216-385-3211 or Keyona.Welch@va.gov.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.

]]>

04/15/2026 02:02 PM EDT

CURRENT BID: 850.0 STATE: WA NO. OF BIDDERS: 2 CLOSE TIME: Wed, 22 Apr 2026 12:02:00 CST

Overview

This lot contains (15) EOTECH XPS2-300 holographic sights from 2017 and (15) Unity Tactical Fast Riser mounts. The lot is classified in used condition. The EOTECH XPS2 is a lightweight, non-magnifying, optical sight designed for close to mid-range engagements. The Unity Tactical FAST Riser brings red dot optics with built in lower 1/3 cowitness picatinny mounts in line with the heights of other Unity Tactical FAST products.

Assets: 1126346, 1126348, 1126349, 1126350, 1126352, 1126353, 1126356, 1126358, 1126360, 1126361, 1126362, 1126364, 1126365, 1126368, 1126370.

Specifications

  • EOTECH XPS2-300:
    • Make: EOTECH
    • Model: XPS2-300
    • Model Year: 2017
  • Unity Tactical Fast Riser:
    • Make: Unity Tactical
    • Model: FAST Riser

Key Features

  • The EOTECH XPS2 features holographic weapon sight technology for target acquisition.
  • The Unity Tactical FAST Riser provides lower 1/3 cowitness picatinny mounting capability.
  • Both components are designed for tactical applications and weapon mounting systems.

Condition & Markings

  • This lot is in used condition. Parts may be missing, and repairs may be required.
  • Scratches and wear are visible on the items as shown in the attached photos.
  • A few pieces of attachment hardware are missing from the components.
  • Working condition is not guaranteed.
  • Items are sold as is.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
  • Purchaser is responsible for loading, removal, and shipping.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.

]]>

04/15/2026 02:02 PM EDT

CURRENT BID: 25.0 STATE: FL NO. OF BIDDERS: 1 CLOSE TIME: Wed, 22 Apr 2026 12:02:00 CST

Overview

(1) Samsung RS28A500ASG refrigerator. The refrigerator is classified in used condition. The unit appears to be a 28 cubic foot side-by-side refrigerator.

Specifications

  • Make: Samsung
  • Model: RS28A500ASG

Key Features

  • 28 cubic foot capacity side-by-side configuration.
  • Standard residential refrigerator design.

Condition & Markings

  • This lot is in used condition. Parts may be missing, and repairs may be required.
  • The purchaser will be responsible for shipping costs and pickup of the item.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted.

]]>

04/15/2026 02:01 PM EDT

CURRENT BID: $50.0 STATE: WA NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 12:01:00 CST

Please contact Nick Cronquist at 360-480-2700 or nick.cronquist@dnr.wa.gov for more information and to arrange removal.

Overview

1975 Advanced Technologies metal liquid storage tank with approximately 100-gallon capacity. The tank is classified in salvage condition. The unit weighs approximately 650 pounds and features metal construction designed for liquid storage applications.

Specifications

  • Make: Advanced Technologies
  • Model Year: 1975
  • Serial Number: T1000-1115
  • Capacity: 100 gallons (approximate)
  • Weight: 650 pounds (approximate)
  • NSN: 5430-00-585-252

Key Features

  • Metal construction suitable for liquid storage applications.
  • Compact design with approximately 100-gallon storage capacity.

Condition & Markings

  • This lot is in salvage condition. Parts are missing, and repairs are required.
  • The tank displays manufacturer markings and NSN identification.
  • Unit requires loading and hauling by the purchaser.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
  • Must be loaded and hauled away by the purchaser.
  • Please contact Nick Cronquist at 360-480-2700 or nick.cronquist@dnr.wa.gov for more information and to arrange removal.

Disclaimer

  • The condition of the property is not warranted. Pictures are not warranted. (ICN: 1240BC-6058-WA50)

]]>

04/15/2026 12:50 PM EDT

CURRENT BID: 20.0 STATE: MO NO. OF BIDDERS: 1 CLOSE TIME: Wed, 22 Apr 2026 10:50:00 CST

Overview

This lot contains (1) pallet of miscellaneous vehicle items including (18) element intake filters, (9) disc brake rotors, (14) headlights LHD RH, (10) incandescent headlights, (4) 24 volt flood lights, and (1) 45″ light bar. (47646360910412) new or unused

Condition & Markings

  • Items are stored in original packaging with manufacturer labels and part numbers visible.
  • Some boxes show minor storage wear and handling marks.
  • All items appear to retain original protective packaging and wrapping.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
  • For any questions or to coordinate pickup, please call 573-751-1163 or email surplusmail@oa.mo.gov.
  • Pickup hours are strictly Monday through Friday from 8am to 3pm.

]]>

04/15/2026 12:46 PM EDT

CURRENT BID: $50.0 STATE: MO NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 10:46:00 CST

Overview

(1) Cargo-6 container. The unit appears to be a portable storage container with interior shelving and organizational components. (47646360910408) usable

Key Features

  • Interior equipped with multiple metal shelving units and storage compartments.
  • Hinged door entry system with locking mechanism.
  • Portable container design suitable for storage applications.

Condition & Markings

  • Exterior shows significant rust and corrosion throughout the surface.
  • Paint is peeling and worn in multiple areas.
  • Interior shelving units appear intact but show signs of wear.
  • Floor shows staining and wear patterns from previous use.

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
  • For any questions or to coordinate pickup, please call 573-751-1163 or email surplusmail@oa.mo.gov. Pickup hours are strictly M-F from 8am to 3pm.

]]>

04/15/2026 12:44 PM EDT

CURRENT BID: $25.0 STATE: MO NO. OF BIDDERS: 0 CLOSE TIME: Wed, 22 Apr 2026 10:44:00 CST

Overview

A-Frame Hoist. (47646360910406) repairable

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
  • For any questions or to coordinate pickup, please call 573-751-1163 or email surplusmail@oa.mo.gov. Pickup hours are strictly Monday through Friday from 8am to 3pm.

]]>

04/15/2026 12:42 PM EDT

CURRENT BID: 20.0 STATE: MO NO. OF BIDDERS: 1 CLOSE TIME: Wed, 22 Apr 2026 10:42:00 CST

Overview

This lot contains (1) concrete cutting saw and (1) tamper. The equipment is mounted on 2 pallets for transport. (47646360910404) repairable

Inspection and Removal

  • Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
  • Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
  • Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
  • Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
  • For any questions or to coordinate pickup, please call 573-751-1163 or email surplusmail@oa.mo.gov.
  • Pickup hours are strictly Monday through Friday from 8am to 3pm.

]]>

Leave a Reply

Your email address will not be published. Required fields are marked *